Capacidad de sellado de los conductos laterales con distintas técnicas de obturación del conducto radicular / Sealing capacity of lateral canals with different root canal obturation techniques

Objetivo: Estimar y comparar la eficacia de diferentes técnicas de obturación para impedir el flujo de colorante a través de los conductos laterales. Materiales y métodos: Se emplearon 50 premolares inferiores extraídos y conservados en formol neutro al 5% hasta el momento de su uso, a los cuales se les realizaron conductos laterales artificiales. Una vez instrumentados los conductos principales, los dientes fueron divididos al azar en 5 grupos (n=10) para ser obturados con cuatro técnicas distintas: A) System B + inyección de gutapercha termoplástica del sistema Elements, Extruder; B) obturadores de Thermafil, ProTaper Universal; C) técnica híbrida y D) obturación con inyección de gutapercha termoplástica del sistema Elements, Extruder. Inmersos en tinta china y diafanizadas las raíces, se evaluó la longitud de penetración de la tinta en los conductos laterales. Se empleó el análisis de la varianza para detectar diferencias significativas (P<0,05) entre los niveles medios de penetración del colorante según las técnicas de obturación y las zonas del diente, y se efectuaron pruebas de rango múltiple (HSD de Tukey) para realizar comparaciones dos a dos, manteniendo fija la tasa de error por familia. Resultados: A la técnica B le correspondió el valor medio más bajo (30,63%) de penetración de tinta china. Los valores medios más elevados (54,52% y 51,74%) correspondieron a las técnicas A y C, respectivamente. Conclusión: Ninguna de las técnicas de obturación del conducto radicular empleadas ha sido capaz de impedir la filtración del colorante en los conductos laterales (AU)

Aim: To estimate and compare the different obturation techniques to avoid the flow of colorant through lateral canals. Materials and methods: 50 extracted lower premolars preserved in 5% neutral formol until the moment of use, had artificial lateral canals made. Once canals were instrumented, the teeth were randomly divided into 5 groups (n=10) to be filled with four different techniques: A) System B + injection of thermoplastic gutta-percha, Elements system, Extruder; B) Thermafil, ProTaper Universal obturators; C) hybrid technique, and D) injection of thermoplastic gutta-percha, Elements system, Extruder. Having immersed the premolars in India ink and diaphanized the roots, the penetration length of the India ink inside the canals was assessed. Analysis of variance was used to detect significant differences (P<0.05) between the mean levels of dye penetration according to the filling techniques and tooth areas, and multiple range tests (Tukey's HSD) were performed for two-to-two comparisons, keeping the error rate per family fixed. Results: Technique B had the lowest mean value (30.63%) of penetration. The highest mean values (54.52% and 51.74%) corresponded to techniques A and C, respectively. Conclusion: No obturation technique of the root canal used was able to avoid filtration of colourant in the lateral canals (AU)

Obturación del sistema de conductos radiculares: revisión de la literatura / Root canal system obturation: a review of the literature

Con el paso de los años, diferentes conceptos atribuidos a temáticas del área de la endodoncia sufren modificaciones. Una de estas etapas es la obturación del sistema de conductos radiculares, este procedimiento sumamente minucioso y crítico en la obtención de un resultado exitoso ha tenido en los últimos años importantes aportaciones en términos de aparición de nuevos materiales y técnicas dentro del campo de la endodoncia. La presente revisión de literatura retoma aspectos básicos que junto al más reciente conocimiento sobre obturación endodóncica permitirán al practicante de la endodoncia enfatizar aspectos de la última etapa operatoria del tratamiento de conductos, con el objetivo de contar con diferentes alternativas de información que le permitan actualizar sus conocimientos en el área de la endodoncia (AU)

Over the years, different thematic concepts attributed to the endodontics are modified. One such step is the sealing of the root canal system, this procedure extremely thorough and critical in obtaining a successful result, it has had in recent years important contributions in terms of new materials and techniques in the field of endodontic. This literature review basic aspects resumed by the latest knowledge about endodontic filling, allow the practitioner endodontics, emphasizing aspects of the last operative stage of root canal, aiming to have alternatives that allow them information update their knowledge on the area of endodontics (AU)

Microfiltración apical in vitro causada por las técnicas de obturación con cono único, System B y condensación lateral clásica / In vitro apical microleakage causade by single-cone, System B and cold lateral condensation obturation techniques

La obtención de un sellado hermético en la obturación del conducto radicular es una etapa coadyuvante del éxito endodóntico. Objetivo: Comparar la microfi ltración apical in vitro, calidad de relleno y presencia de espacios vacíos en conductos radiculares obturados con los métodos de obturación cono único, condensación lateral clásica y System B. Material y métodos: Noventa raíces mesiales de molares inferiores fueron instrumentados con ProTaper a un calibre F3 y asignados aleatoriamente para su obturación a tres grupos (n = 30 raíces), grupo 1: condensación lateral clásica con gutapercha #30.02, grupo 2: cono único con gutapercha F3 y grupo 3: System B con gutapercha #30.02; en todas las técnicas se usó una mezcla de óxido de zinc eugenol como sellador.Obturados los conductos las muestras se sumergieron en azul de metileno al 0.5 por ciento, se centrifugaron a 3,200 rpm durante cinco minutos, se diafanizarony se llevaron al microscopio estereoscópico a 12.5x para la mediciónde microfi ltración apical, calidad de relleno y presencia de espacios vacíospor un observador calibrado. Resultados: No se encontraron diferencias significativas en la microfi ltración apical entre el grupo de condensación lateral clásica y System B (p > 0.05) siendo el cono único la técnica que presenta mayor fi ltración. La técnica que ofrece la menor cantidad de espacios vacíos y mejor calidad de relleno es System B. Conclusiones:El método System B y condensación lateral clásica dejan una baja microfiltración apical y adecuada calidad de relleno comparada con la que sepresenta con cono único utilizando como sellador óxido de zinc eugenol...

Interfase TopSeal-dentina en relación con dos técnicas de obturación: condensación lateral y técnica termoplastificada/termorreblandecida: estudio de microscopía electrónica de barrido / TopSeal-dentine interface after two obturation techniques: lateral condensation and thermoplastified/thermosoftened technique: a SEM study

Antecedentes: los sistemas de obturación endodóntica con condensación vertical (CV) han mejorado la calidad de los tratamientos al ser comparados con la condensación lateral (CL). Ellos permiten mejorar la difusión y la adaptabilidad del cemento sellador (CS) y la gutapercha (GP) para obtener un sellado hermético y garantizar la ausencia de brechas en la interfase del material obturador-dentina. Sin embargo, no se ha determinado si la aplicación de calor puede o no alterar la interfase de los cementos selladores a la dentina (ICS-D). Objetivo: comparar la ICS-D (TopSeal®)-dentina a diferentes distancias del ápice radicular, al utilizar dos técnicas de obturación, lateral y vertical. Método: se realizó un estudio experimental in vitro de microscopía electrónica de barrido MEB. Se tomaron 40 premolares unirradiculares recién extraídos, a los cuales se les realizó tratamiento endodóntico,utilizando la misma técnica de instrumentación. De éstos, 20 fueron obturados con CL y TopSeal®, y 20 fueron obturados con CV y el mismo cemento. Posteriormente, se seccionaron a 1, 4 y 8 mm del ápice radicular, y se observaron bajo MEB. Resultados: la ICS-D se ve modificada al utilizar las técnicas de CV cuando se compara con la CL, y se reportan valores estadísticamente significativos en todas las distancias medidas (p<0,05). Conclusiones: la técnica termoplastificada/termorreblandecida reduce la ICS-D con respecto a la CL. Sin embargo, en la primera técnica se observó mayor espesor de cemento a 1 mm de altura, lo que pudiese tener implicaciones clínicas de importancia.

Background: Vertical condensation (VC) endodontic systems have improved results of endodontic treatment when compared to lateral condensation (LC). They improve the diffusion and adaptability of the sealer cement (SC) and the gutta-percha (GP), in order to obtain a hermetic sealing and ensure the lack of cracks in the sealer material-dentine interface. However, it has not been established whether the application of heat may or not alter the sealer cement-dentine interface (SCDI). Objective: Compare the SCDI at different distances from the root apex, when using two obturation techniques, vertical (TopSeal®) and lateral. Methods: An in vitro experimental study with scanning electron microscopy (SEM) was carried out. Canals of 40 recently extracted single-root premolars were endodontically prepared with the same instrumentation technique. 20 of them were sealed with LC and TopSeal® and the other 20 were sealed with VC and TopSeal®. The specimens were then cut at 1 mm, 4 mm, and 8 mm from the root apex and observed under SEM. Results: Statistically significant differences were observed in the SCDI of teeth sealed with VC compared to those sealed with LC (p<0,05). Conclusions: The thermoplastified/thermosoftened technique reduces the SCDI when compared to the LC technique. However, the former showed a thicker cement layer on the 1 mm measures, which may have significant clinic implications.

The Effect of canal obturation according to the depth of the System B Plugger tip in the Type IV canal / 대한치과보존학회지

The purpose of this study was to evaluate the effect of the apical sealing according to the depth of the System B Plugger tip when root canal was filled with gutta-percha and sealer by Continuous Wave of Condensation technique in the Type IV canal. 50 simulated resin blocks with J-shaped curvature canals were instrumented by ProTaper (Dentsply Maillefer, Ballagiues, Switzerland) Ni-Ti files using the crown-down technique. Type IV canals were made using a broken ProTaper F3 Ni-Ti file for making a ledge at 3mm short from the working length. And ProTaper F1 Ni-Ti file was used for perforating resin block. The prepared Type IV canals were randomly divided into three experimental groups of 15 each according to the depth of System B Plugger tip. All of experimental groups were obturated with Continuous Wave of Condensation technique. The length of gutta-percha and sealer in lingual of the Type IV canals was measured with a measuring digital calliper under magnifying glass (x 2.3). The results are as follows : 1. In control group, there was no gutta-percha and sealer in lingual canal. 2. 3 mm group showed relatively more gutta-percha than 5mm or 7 mm group (p<0.05). 3. 7 mm group did not showed gutta-percha and relatively more void were observed than 3mm or 5 mm group. (p<0.05) In conclusion, within the limits of the results of this experiment, the 3 mm depth of System B Plugger tip was acceptable for obturating the Type IV canal.

Comparison of apical sealing ability of continuous wave of obturation technique using EndoTwinn and System B / 대한치과보존학회지

The purpose of this study was to compare the apical leakage of the root canal filled with the System B and the EndoTwinn (the combined application of heat and ultrasonic vibration). Sixty extracted premolars with straight root were cleaned and shaped to size 35. Group SB was obturated using System B and Group ET was filled with EndoTwinn. A size 35 of 0.06 tapered gutta- percha and Adseal were used and the plugger which could be introduced to 4 mm short of working length was selected in the obturation procedure. As the positive control, Group PC was not filled. In Group SB, ET and PC, all external surfaces of each tooth were coated with nail varnish leaving only 1 mm area around the apical foramen. In the negative control of Group NSB and Group NET, all of external tooth surface including apical foramen was coated with the nail varnish. The specimens were immersed in methylene blue dye solution for 2 days. Then the specimens were sectioned at each 1 mm from apex to 5 mm level. The final score of one specimen was given by summing up of the points at all levels. The dye leakage of Group ET was significantly less than that observed in Group SB (p < 0.05). And the frequency of gutta-percha pulling out from root canal when the plugger was removed was more often with the System B than with EndoTwinn but there was no significant difference.

Scanning electron microscopic study on root canal cleaning effect using sodium hypochlorite at different temperatures / 吉林大学学报(医学版)

Objective To assess the efficacy of NaClO irrigation of root canal at different temperatures.(Methods Thirty) human teeth with single root-canal mandible premolar were instrumented using standard technique,then were divided into 3 groups,carrying on root-canal irrigation.group A: 5.25% NaClO+System B,group B:5.25% NaClO+15% EDTA,group C:5.25% NaClO+System B+15% EDTA.After the teeth root were split,the scanning electron microscope was used to observe the coronal third,middle third and apical third parts.(Results The) amount of remaining debris on root canal wall in group C decreased significantly,compared with group A and B.The differences of coronal third and middle third between group A and B,group B and C,group A and C were significant(P0.05),but there were significant differences between group A,B and C(P

Influence of plugger penetration depth on the area of the canal space occupied by gutta-percha / 대한치과보존학회지

To evaluate the ratio of gutta-percha area in the canal after canal obturation with Continuous Wave of Condensation Technique (CWCT) with varying depths of plugger penetration, forty root canals of extracted human teeth were prepared up to size 40 of 0.06 taper with ProFile(R). Canals of three groups were filled with CWCT with System B(TM) (Analytic Tech., USA) and different plugger penetration depths of 3, 5, or 7 mm from the apex. Canals of one group were filled with lateral condensation technique as a control. The filled teeth were cross-sectioned at 1, 2, and 3 mm levels from the apical foramen. The ratio of gutta-percha area in the canal was analyzed using Auto(R)Cad 2000. Data were analyzed with one-way ANOVA and Duncan's multiple range test. At all levels, higher gutta-percha area ratio was found with deeper plugger penetration depth in CWCT, and cold lateral condensation group showed higher ratio than group of plugger penetration to apical 7 mm in CWCT. At apical 1 mm and 2 mm levels, group of plugger penetration to apical 3 mm showed significantly higher gutta-percha area ratio than those of apical 7 mm and lateral condensation (p < 0.05). It is concluded therefore that, under the conditions of the present study, deeper plugger penetration depth results in more favorable and efficient obturation in CWCT.

Analysis of temperature rise on the surface of buchanan plugger using thermocouple / 대한치과보존학회지

This study was performed to evaluate the actual temperature rise on the surface of Buchanan plugger using thermocouple. The heat carrier system 'System B Heatsource' (Model 1005, Analytic Technologies, Redmond, WA, USA) and the Buchanan pluggers of F, FM, M and ML sizes are used for this study. The temperature was set to 200degrees C on digital display and the power level on it was set to 10. Five thermocouples were placed in direct contact with the surface of each size of Buchanan's pluggers at 1 mm increments from the tip to the 4 mm length of shank. The heat control spring was touched for 5 seconds, and the temperature rise on the surface of the pluggers were measured at 1 sec intervals for more than 5 seconds with an accuracy of 0.01 using Data Logger. The data were statistically analyzed by one-way ANOVA. The results were as follows. 1. The position at which the temperature peaked was approximately at 1~2 mm far from the tip of Buchanan plugger (p<0.01). 2. The peak temperature was 215.25+/-2.28degrees C in F plugger, 185.94+/-2.19degrees C in FM plugger, 169.51+/-9.12degrees C in M plugger, and 160.79+/-1.27degrees C in ML plugger and the peak temperature was highest in F plugger and followed by, in descending order, FM plugger, M plugger. ML plugger showed the lowest peak temperature (p<0.01). 3. The temperature on the pluggers was decreased with the increase of touching time. This results suggest that the actual temperature on the surface of the pluggers does not correlate well with the temperature set on digital display. Heat concentrates around the tip. The larger plugger reveals lower temperature rise relatively.

Anterior Ceervical Interbody Fusion: Comparison Study between Simple Fusion, Locked and Non-locked Plating Systems

The use of metallic plate and screws in the anterior cervical fusion has become generally acceptable and popular. Mainly, there are two different plating systems available. However, there has been few attempts to compare their clinical results with and without a plating system or between two different systems in a single series of clinical study. The authors reviewed 117 patients who underwent anterior cervical fusion during the period of January 1992 to September 1996. Simple fusion without a plating system was applied in 55 cases(group 1), a bicortical non-locked plate screw system in 25(group 2), and a monocortical locked plate screw system in 37(group 3). The average follow-up period was 13. 2 months. In group 1, twenty-two patients(40%) with fracture-dislocation or corpectomy required a rigid brace such as halo brace and Minerva cast for 3 months postope ratively and seven patients(13%) experienced graft complications, mainly graft extrusion. In group 2 and 3, the patients required only soft b races for 4 to 8 weeks and no patients experienced serious graft complications like ones in group 1 but, instead two patients with screw breakages, two back-outs and one non-union were observed. In comparison of the clinical complications such as hoarsness, there were no significant differences between the groups. In conclusion, the plating system in anterior cervical fusion appears to be safe despite the facts that mo re technical demands are required during surgery. It also provides better postoperative stability in the spine and permits earlier ambulation without a rigid brace. A monocortical locked plate screw system appears to have less hardware failures and better su rgical results than a bicortical non-locked plate screw system.